Managing a Hot Water System Emergency: Proven Strategies
Managing a Hot Water System Emergency: Proven Strategies
Blog Article
We've stumbled on the article about How to Troubleshoot and Repair an Electric Water Heater down the page on the web and felt it made good sense to relate it with you on my blog.
Numerous modern-day houses utilize an electric hot water heater for their heater, as a result of its convenience and simplicity of use. However, similar to any other electrical appliances, problems might emerge with its usage, suddenly. It can be really discouraging to awaken to a cool shower instead of a warm one or having your bathroom with water that isn't hot enough or even as well hot. Whatever the case might be, water heater problems can be fairly stressful. Fortunately, we've made a list of possible solutions to your water heater issues. There are a variety of factors that might cause much of these issues, maybe a concern with the power supply, the electric heating element, or the thermostat. Before doing anything, guarantee you switch off the main power supply for security. Whatever the trouble is, getting it taken care of must not posture way too much of an issue if you follow these steps:
Examine Your Power Supply:
As basic as this might seem, it is very necessary. Without ample power, your hot water heater will not operate. So the first thing to do when your water unexpectedly retires is to verify that it isn't a power trouble. Examine if the fuse is blown out or the breaker stumbled. If the circuit breaker is the concern, just turn it on and off once again. Change any type of broken or worn-out fuse. Evaluate the device with power after these adjustments to see if it's now functioning.
Examine the Burner in the Hot Water Heater:
If it's not a power trouble, then attempt looking into your burner if it is still functioning. Check each of your heating elements to make sure the issue isn't with any of them. If any one of them is damaged, replace that component and after that inspect whether the hot water is back on.
Check Your Thermostat:
If your hot water heater still isn't functioning or the water appearing isn't warm enough, you may require to examine the temperature level settings on your upper thermostat. Ensure the breaker is turned off before doing anything. Open up the access panel as well as press the red button for temperature level reset over the thermostat. This need to help heat up the water. Transform the breaker back on and check if the issue has been solved.
Call A Professional:
If after replacing all defective parts as well as resetting your temperature level, the hot water heater still isn't functioning, you might require to speak to a specialist plumber for a professional opinion. The issue with your heating system could be that the cold and hot taps have actually been changed or it might be undersized for the quantity of hot water needed in your home. Whatever the instance might be, a specialist plumber would certainly assist fix the trouble.
Verdict
Hot water heater issues are not constantly major. A number of them result from small concerns like a blown fuse or damaged heating element. Changing the damaged components must do the trick. However, if you are still unable to solve the issue, give a call to your nearby plumber ahead to get it dealt with.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
Hopefully you enjoyed our post about No Hot Water — Water Heater Repair. Many thanks for spending some time to read through our posting. Those who appreciated our blog post please don't forget to pass it around. Kudos for your time. Please check our site back soon.
Expert hands available. Report this page